Featured Ranges:

P-line Lifting Deck

Pigs aren't fond of ramps and drivers have better things to do than coax pigs up them! The solution is a lifting deck.

Our decks are manufactured from sturdy, hygienic alloy planking with flush undersides to prevent back-rub and are welded all round and fully sealed to stop fouling from above. 

Key Features

  • Anti-slip alloy flooring
  • Lifting deck to full length of main bed
  • Straight or step frame designs available

Chasis Options

  • Drawbar Trailer versions
  • Platform and Sub-frame versions
  • Step Frame Trailer versions
  • Straight Frame Trailer versions


    • Platinum Three Deck
    • Professional Lifting Deck
    • Professional Three Tier Lifting Deck


    Rigid: 4.88m (16') upwards in modules of 305mm (1')

    Trailer: From 9.14m (30') to max legal limit

    Drawbar: From 5.48m (18') to 9.14m (30')   

    External Width

    Rigid: 2.55m (8'4") or 2.39m (7'10") 

    Trailer: 2.55m (8'4") 

    Drawbar Trailer: 2.55m (8'4") 

    Standard Features

    • 127mm vents to both decks with closing flaps to bottom deck
    • All alloy rear loading gates using horizontal design for safety
    • All steel components hot-dip galvanised or zinc plated
    • Anti-slip alloy floor
    • Conspicuity tape (mandatory to all vehicles and trailers registered after 10th July 2011)
    • Equal deck heights (other deck heights available)
    • Fixed alloy internal dividing gates with slam shut lever lock gate system
    • Galvanised steel roof with PVC lining to reduce condensation
    • High-grade alloy panelling
    • Houghton ‘H’ frame cattle gates with integrated alloy sheep gates (step frame version only)
    • Hydraulic deck constructed from high-grade alloy planking, welded all round and sealed giving flush underside
    • Hydraulic lifting deck to full length of main bed
    • Inspection door to each deck
    • LED marker lights to comply with legal requirements
    • Matt black rear ramp to prevent startling through sun glare
    • Nexa Autocolor Turbo Plus 2-pack paint system in one colour of your choice
    • One Cattle gate to bottom deck per 3.05m of transporter (2.61m version only)
    • One gate per deck supplied to suit 3.05m length of transporter
    • One light per pen externally switched
    • Spring assisted rear door incorporating special pressed alloy ribbed panels
    • Stainless steel hinge pins
    • Straight and step-frame versions available
    • Swan neck with alloy folding deck and slam shut lever lock gate (step frame version)
    • Transporter frame and rear door painted one colour to your specification (alloy natural)

    Extra Options

    • Hydraulic rear door within a door for loading through
    • Stop/indicator options
    • (N.B. - Some features subject to compatibility)


    John Houghton, already an experienced joiner, takes on his first premises in Milnthorpe on the edge of the Lake District.


    You can spread the cost of this product using our finance scheme


    Request a feature

    You can only compare products within the same product line. Click the link below to clear previously selected products.